You can setup motion in the Settings page of the App or Web Interface.
Motion detection – You can setup a 2-stage rule to automatically turn down you’re heating when no motion is detected in the property.
Rule 1 – Select your time frame and temperature – After the time frame selected, if no motion has been detected your heating will turn down to the temperature selected. The lower temperature will be maintained until the next setpoint change on your heating profile, the temperature will follow this setpoint and the rule will start again from the beginning of the setpoint change. At any point within the selected time frame motion is detected it will then start following your heating profile as normal.
Rule 2 - Select your time frame and temperature – After Rule 1 has been activated, if no further motion is detected at the time frame selected, it will turn the heating down to that temperature where it will be kept until motion is detected. Once motion has been detected it will start following your heating profile.