Inspire Home Automation

James Hunter

Morgan Davis

Select your unit type for further information.

Please select Unit Type

Set Boost time and temperature in Settings. Activate Boost via the App, Web Interface, or thermostat. If Boost Only is enabled, tap the left side of the screen - or…

How do I set and use the boost?

Set the Frost Temperature in the App or Web Interface under Settings. When the Thermostat is in Off mode, it will continue to protect the room by ensuring the temperature…

How do I set the Frost Temperature?

Enable or disable the Intro Sequence in Settings via the App or Web Interface. When enabled, tapping the screen shows a brief 5-second display guide. When disabled, the Thermostat turns…

How do I turn off the Intro Sequence?

If the temperature reading is slightly inaccurate (within ±5°C), you can correct it using the temperature offset setting. Adjust this easily from the Settings page in the App or Web…

The temperature reading is incorrect, can I adjust this?

When in Auto mode, it preheats your room so it reaches the set temperature at the start of a schedule, rather than beginning to heat at that time. Note, this…

How do I change Optimized Start?

Set the Boiler Type in Settings via the App or Web Interface. Combi hides hot water controls as it’s on demand. Other enables control of hot water schedules. Note: Hot…

How do I set the Boiler Type?

Set up Motion Detection in Settings to reduce heating when no movement is detected. Rule 1 lowers temperature after a set time, and Rule 2 reduces it further if inactivity…

How do I setup Motion?

Set a name for your Thermostat in the Settings page of the App or Web Interface. This helps you identify your device, especially if you have more than one. A…

How do I name my Thermostat?

Hide a unit by selecting “Hide Me” in Settings via the App or Web Interface. This temporarily removes it from view (e.g. unused channels). To permanently remove a unit, such…

How do I hide a unit from my account?

Restore a hidden unit by selecting “Show Me” in the Settings page of the App or Web Interface. This will make the unit visible again on your account so it…

How do I get a previously hidden unit back?

Set your Time Zone in the Settings page of the App or Web Interface to ensure your heating schedule and system timings run accurately based on your local time.

How do I set the Time Zone?

Set up heating schedules in the Schedules page of the App or Web Interface. Use the provided video guide for step-by-step instructions to create and manage your heating schedule.

How do I set my Heating Schedules?

Use the Locks page to restrict Thermostat functions. Options include blocking registration, enabling boost-only mode, restricting temperature changes, setting min/max limits, and locking specific features.

How do I set Locks on my Thermostat?

Go to Calendar, then Calendar Setup in the App or Web Interface. Follow the video guide for step-by-step instructions on setting up and managing your calendar.

How do I link a Calendar to my Thermostat?

The API allows integration of Inspire Home Automation thermostats with external systems and is intended for software engineers. Documentation is available online.

How do I use your API?

Set up hot water schedules in the Schedules page of the App or Web Interface. Hot water schedules is set in a similar way to your Heating schedules

How do I set my Hot Water Schedule?

This articles shows you how to set the active schedule, e.g. switch between summer and winter schedules (sometimes referred to as profile or program)

How do I switch to a different Heating Schedule?

The thermostat padlock flashes whenever a button is pressed and the requested action is not allowed.

When does the padlock show?

You can check signal strength from the app, via Bluetooth using Installer Diagnostics, or directly on the Thermostat. A stronger signal helps ensure reliable communication between your devices.

How do I view Signal Strength?

If your thermostat isn't following its schedule, check whether Restricted Set Points, Motion Rules, or Optimised Start are enabled, as these features can affect how and when the heating operates.

The temperature is changing and not following the schedule

Ignite Touch

When in Auto mode, it preheats your room so it reaches the set temperature at the start of a schedule, rather than beginning to heat at that time.
Note, this…

How do I hide a unit from my account

How do I link a Calendar to my Inspire System?

Set a name for your device in the Settings page of the App or Web Interface. This helps you identify your device, especially if you have more than one. A…

How do I name my device?

Set Boost time and temperature in Settings. Activate Boost via the App, Web Interface, or thermostat.

Set the Frost Temperature in the App or Web Interface under Settings. When the Heating is in Off mode, it will continue to protect the room by ensuring the temperature…

Ignite Lite

Use the Locks page to restrict Thermostat functions. Options include blocking registration, restricting temperature changes, setting min/max limits, and locking specific features.

Optimized Temperature Control learns how quickly your property heats and cools, adjusting heating cycles to maintain a more consistent temperature. Unlike standard hysteresis control, it reduces temperature swings and improves…

What is Optimized Temperature Control?

Ignite Wireless (March 2021 Onwards)

You can check signal strength from the app or directly on the Thermostat. A stronger signal helps ensure reliable communication between your devices.

Ignite Wireless (Jan 2017 - March 2021)

If your thermostat shows the wrong temperature, you can adjust the temperature offset in Settings for small differences (±5°C). Larger errors may indicate a sensor issue. Contact Inspire for support.

Incorrect Temperature

Hot water controls is not applicable to the Ignite Wired.

You can check signal strength from the app, on the Thermostat or directly on the Smart Sensor. A stronger signal helps ensure reliable communication between your devices.

Ignite Wired

Ignite Wired (Heating and Hot Water)

If your thermostat shows the wrong temperature, you can adjust the temperature offset in Settings for small differences (±5°C). Larger errors may indicate a sensor issue. Clean the sensor if…

Yes. You can manage multiple properties from a single Inspire Home Automation account, with support for over 200 thermostats.

Can I control more than one property?

If your thermostat isn't following its schedule, check whether Restricted Set Points are enabled and the time, as these features can affect how and when the heating operates.

NS Series

Return to Inspire Website

No tickets or conversations found

Try selecting a different creation date range.

Tickets and conversations you've started through the messenger will appear here.

No tickets or conversations created by you

Try using different keywords or checking for typos.

Try selecting a different update date range.

Find answers and get help from Intercom Support and Community Experts

Conversations you've started through the messenger will appear here.

No conversations created by you

No conversations found

AI title

Title

This site employs cookies and other technologies that we and our third party vendors use to monitor and record personal information about you and your interactions with the site (including content viewed, cursor movements, screen recordings, and chat contents) for the purposes described in our Cookie Policy. By continuing to visit our site, you agree to our {websiteTermsLink}, {privacyPolicyLink} and {cookiePolicyLink}.

This site uses cookies and similar technologies ("cookies") as strictly necessary for site operation. We and our partners also would like to set additional cookies to enable site performance analytics, functionality, advertising and social media features. See our {cookiePolicyLink} for details. You can change your cookie preferences in our Cookie Settings.

We use cookies to make our site work and also for analytics and advertising purposes. You can enable or disable optional cookies as desired. See our {cookiePolicyLink} for more details.

Advertising cookies are set by our advertising partners to collect information about your use of the site, our communications, and other online services over time and with different browsers and devices. They use this information to show you ads online that they think will interest you and measure the ads' performance. Social media cookies are set by social media platforms to enable you to share content on those platforms, and are capable of tracking information about your activity across other online services for use as described in their privacy policies.

These cookies enable the website to provide enhanced functionality and personalisation. They may be set by us or by third party providers whose services we have added to our pages. If you do not allow these cookies then some or all of these services may not function properly.

These cookies are necessary for the website to function and cannot be switched off in our systems.

These cookies allow us to count visits and traffic sources so we can measure and improve the performance of our site. They help us to know which pages are the most and least popular and see how visitors move around the site.

You have the right to opt out of the sale of your personal information. See our {cookiePolicyLink} for more details about how we use your data.

Your Privacy Choices

We use cookies to enhance your experience. You can customize your cookie preferences below. See our {cookiePolicyLink} for more details.

Cookie Settings

Empty Help Center

Uh oh. That page doesn’t exist.

Home

Search results

Disappointed

Neutral

Smiley

Thinking...

Searching through sources...

Analyzing...

Tickets submitted through the messenger or by a support agent in your conversation will appear here.

No tickets created by you

No tickets found

Conversations and tickets in {topic}

Conversations and tickets in {topic} // {subtopic}

Volume, creators and topics for your company.

Insights

Top creators

AI topics

Track the progress of all tickets and conversations related to your company.

Customer Portal.

Track the progress of all tickets related to your company.

Tickets portal.

{assigneeName} needs more information from you

Tickets

No access to tickets portal

You're not signed in on this browser. Sign in through this site's Messenger, then reload this page.

Sign in to view your company's tickets

Search

Skip the search. Describe what you’re trying to do and get a grounded answer.

Browse articles and guides in this topic.

Create your workspace and invite the people you work with.

Set up your account

Build your first workflow and watch it run end to end.

Ship something

Connect the tools your team already uses to bring data in.

Connect your stack

A quick lap of the product so you know where everything lives.

{appName} in 60 seconds

This prototype demo is aware that you are reading “{title}”. It can point you back to the current article, but a production article-aware Fin contract is still follow-up work.

Prototype article-aware answer

Because you already asked about invitations, this prototype demo can add the follow-up: use the role selector before sending each invite to limit access to the teammate responsibilities.

Prototype role-limiting follow-up

This prototype demo suggests starting with your workspace profile, inviting the team members who need access, and then connecting the integrations you use.

Prototype getting-started answer

In this prototype demo, integrations are configured from workspace settings. Choose the integration, connect the account, and review the enabled permissions.

Prototype integrations answer

In this prototype demo, invite teammates from workspace settings, then choose the access each teammate needs before sending the invitation.

Prototype invite-team answer

This prototype demo does not have a scripted answer for that question yet. Try asking how to invite your team or open a source article. No production Fin API was called.

Prototype answer unavailable

I’ve got this page open. Ask me anything about it and I’ll answer from the docs.

Reading along with you

Create your account and invite the first people to your workspace.

Pick the right role for each person you add.

Update your plan, payment method, and invoices.

Collections